At a glance

Shadowrocket’s Data page shows traffic recorded by the client; it is not a usage statement from your service provider. This guide focuses on iPhone and iPad and explains how to set a consistent observation window, compare traffic changes by server and app, and use Global Routing and connection records to understand routing results. It is for users who have already configured their own service and want to trace traffic or explain differences in reported usage.

1. Understand traffic, speed, and measurement scope

Traffic is the amount of data transferred over a period, commonly shown in KB, MB, or GB. Speed is the current transfer rate, typically shown in KB/s or MB/s. A cumulative figure in Data can keep rising even when nothing is downloading quickly; a high transfer rate at the start of a session can still correspond to a small total. Check the units before reading a value, and don’t mistake a figure ending in “/s” for plan usage.

2 dimensions
View traffic by server or by app
2 directions
Upload is outbound; Download is inbound
4 things to keep in mind
Global Routing:Proxy / Direct / Config / Scene

Interpret Upload and Download from the device’s perspective: sending a photo or submitting a form is outbound, while receiving an image or downloading a file is inbound. Video playback also involves requests, acknowledgments, and control data, so some Upload traffic is normal. If the page shows Total, first check whether it applies to the current row, group, or entire observation window. Don’t infer its scope from the number’s position alone.

2. Set up a repeatable observation window

A common source of confusion is using several days of cumulative data to explain a single request made just now. For a clearer test, use a short window with one app and one target: note the starting figures, perform one specific action, then note the ending figures. You don’t need to clear historical statistics; subtracting the starting value from the ending value gives you the change during the test.

  1. On your iPhone or iPad, open Shadowrocket. In Home, check the connection status, selected server, and current Global Routing selection.
  2. If you use Config, open Config and confirm which configuration is enabled. Importing a configuration does not mean it is currently active.
  3. Open Data and note the starting Upload and Download figures for the relevant server, along with the target entry in the app group. Fields may vary by interface version.
  4. Pause cloud sync, app updates, and other downloads. In one app, perform a single request, such as loading a page you haven’t opened before.
  5. Wait for the transfer to finish and the statistics to refresh, then record the ending figures. Note the time, network type, server, and routing mode as well.

Follow the same steps on iPad. Other apps in Split View may continue using the network, so pause their tasks before testing. You can use the same “starting value → one action → ending value” method on Mac, Windows, Android, and Linux, but available app-attribution details and navigation depend on the platform. Don’t assume the iPhone screens are in the same places on other platforms.

3. Check by server: identify the outbound server carrying the traffic

The server view helps answer, “Did this traffic go through the selected proxy server?” Find the server entry you noted before the test and compare its change afterward, rather than looking only at which server has the largest cumulative figure. Statistics for previously used servers may remain in the observation window after you switch away from them.

What to checkWhat it can tell youWhat it cannot tell you on its own
Upload changeHow much outbound traffic the entry recorded during the observation windowThe original file size or the final amount billed by your provider
Download changeHow much inbound traffic the entry recorded during the observation windowWhether the page loaded fully or its content came from cache
Several servers show an increaseMore than one outbound connection was active during the window; investigate furtherThat the current manual selection did not take effect
No clear increase for a serverRouting, caching, connections, and statistics refresh may need checkingThat the client transferred no data

If several servers show an increase at the same time, first check policy selections in the configuration, whether you switched servers during the test, and whether older connections were still active. Routing choices generally apply to connections; an established long-lived connection may not move immediately after a switch. To reduce this interference, stop the test app’s existing transfers and make a new request.

How to verify the outbound server with a new connection

If the old entry keeps increasing after you switch servers, stop the original download and use a new request to measure the change again. Don’t keep changing the configuration based only on the old entry’s cumulative figure.

4. Check by app: trace traffic sources without treating attribution as a complete audit

The app view helps narrow down what to investigate, such as distinguishing browser activity from background sync or transfers in other apps. It shows the same activity from a different perspective than the server view; the two figures are not separate amounts to add together. One app may contact multiple domains that match DIRECT and PROXY separately, so traffic attributed to an app does not mean every request from it used the same server.

App requestTunnel receives trafficRouting decisionOutbound transferTraffic attribution

The level of app attribution depends on what information the system provides and how the client currently implements it. On iPhone and iPad, some connections may not map accurately to an individual app. If an entry is unidentified or grouped with others, don’t assume its name identifies a specific background process. System processes, extensions, and shared networking components can also make the app a user sees differ from the app attribution in the statistics.

It’s also important to check whether the page content came from cache. Reopening a cached image may generate only a small validation request, so a small increase on the server does not prove that the request used DIRECT. Choose a permitted, clearly identifiable destination for testing, and don’t repeatedly download large files just to watch the statistics change.

5. Interpret the figures using Global Routing and rules

Traffic statistics show the result; Global Routing and the active configuration help explain how it occurred. Proxy generally sends intercepted requests to the selected proxy policy, Direct uses a direct connection, and Config routes traffic according to the enabled configuration’s rules. With Scene, first confirm which scene is active and what it actually does. None of these modes means the client can track all network activity on the system, including traffic it does not intercept.

Routing details to note before testing

Home
Note the selected server and connection status
Global Routing
Note the actual Proxy / Direct / Config / Scene selection
Config
Note which configuration is currently enabled
Settings → On Demand
Check for automatic connection conditions

Keep the state consistent, then compare traffic changes over the same period.

Recognizing rule syntax

DOMAIN-SUFFIX
DOMAIN-SUFFIX,example.com,PROXY
IP-CIDR
IP-CIDR,192.0.2.0/24,DIRECT
GEOIP
GEOIP,CN,DIRECT
FINAL
FINAL,PROXY

These are syntax examples, not complete configurations to replace yours with. Use policy names that match your configuration.

In Config, check matches against the actual rule order. DOMAIN-SUFFIX matches domain suffixes, IP-CIDR matches address ranges, GEOIP uses an IP geolocation database, and FINAL handles requests that did not match earlier rules. A page may request images, fonts, APIs, and other resources, so its connections can use different outbound routes. Don’t use the single domain in the address bar to explain all the page’s traffic.

  1. Find the domain or IP for the request you tested, rather than looking only at the app name.
  2. Check the connection record for the actual policy or outbound server; note any rule-match details as well.
  3. Return to the active Config and check the rule order to see whether an earlier rule matches the destination.
  4. Change one condition only, then make a new connection and check whether the new Data figures change.

6. Use traffic changes to explain differences between the client and your bill

The numbers below are a calculation example, not product test results. Suppose the same server shows Upload at 12 MB and Download at 80 MB at the start of the observation window, then 13 MB and 100 MB at the end. Upload increased by 1 MB and Download by 20 MB, for a combined change of 21 MB based on the displayed values. Don’t count the ending total of 113 MB as the usage for this request.

DirectionStarting valueEnding valueChange during this test
Upload12 MB13 MB1 MB
Download80 MB100 MB20 MB
Combined total92 MB113 MB21 MB

If the client and your provider’s dashboard don’t match, first align the billing periods and Upload/Download definitions. Then check for a provider multiplier, delayed billing updates, and other devices using the same account. Protocol overhead, retransmissions, where bytes are counted, and rounding in the display can also cause differences. MB and MiB are not interchangeable without conversion: 1 decimal MB is 1,000,000 bytes, while 1 binary MiB is 1,048,576 bytes.

Comparison order: align the time periods before explaining the difference

Record Upload and Download changes for the same device, server, and time window, then compare them with the corresponding provider records. A screenshot showing only cumulative totals is not enough to identify the source of a difference.

7. Common questions about Data figures

Why isn’t the server’s traffic increasing even though I’m connected?

First, check in Home whether Global Routing is set to Direct. If it’s set to Config, check whether the test request matched DIRECT. Then rule out cached content, make a new request, and wait for Data to refresh. An enabled connection only confirms the tunnel is up; it doesn’t prove every request went through a proxy server.

Why does Download keep increasing after I quit the test app?

Stop downloads and background sync first, then check whether other apps are still using the network. Measure the change over one minute and check connection records for the same period. Video preloading, long-lived connections, and system tasks can all continue transferring data, so don’t assume the statistics are wrong just because the foreground app has closed.

Why don’t the app totals match the server totals?

First, make sure both views cover the same observation window and have refreshed. App attribution may be incomplete, and the displayed coverage for DIRECT and proxy traffic may differ. Check the scope of each figure; don’t add the app and server views together or assume either one fully covers the other.

Why didn’t my traffic reset after I updated my subscription?

A subscription update refreshes server details; it does not reset the statistics period. After updating, confirm the selected server in Home, then record a new starting point in Data. Deleting and reimporting a subscription is not a way to reset statistics and may lose useful information for troubleshooting.

Does an increase in traffic mean the web page opened successfully?

No. Handshakes, retries, and partial responses can all transfer data. First confirm that the page finished loading, then check the destination, outbound route, and error details in the connection records. To troubleshoot connectivity, use the relevant guide on this site rather than treating cumulative traffic as a measure of success rate or latency.

Download Shadowrocket and follow the setup guide

The iPhone / iPad app costs $2.99 as a one-time App Store purchase. The Mac (Apple Silicon / Intel), Windows, Android, and Linux versions are free. For iPhone / iPad system requirements, see the App Store listing. The developer is Shadow Launch Technology Limited. Choose the download option for your device, then follow the setup guide.

A one-time app purchase is not a service plan. This guide assumes you already have your own provider and subscription. This site does not provide, sell, or recommend proxy servers, subscriptions, or connection services. For differences between usage statistics and billing, check the billing terms with your existing provider.